There are several threads that weave through them all. Rings, of course, but also a ritual, exploratory process that put me in collaboration with the materials and fabrication in a quest to discover (and be surprised by) the eventual form. 

As the process evolved they became more complex and dense, varying from complete chaos to ideas of order, from an assembly of iterations of one element to a complex that involved five or six different shapes, and from fourteen elements overall to too many to count.  

Each of the final pieces has its grace and strengths; they each exist as individuals and as generations of kin—as dependent on one another as they are each freed from those that came before. 

Looking Back
When ten were complete I looked back to the original, the great grandmother of them all, and wondered what it was that I found so singularly compelling about that first.

It had the fewest parts, as well as the fewest rules of engagement. These details give it an open, uncomplicated stance I appreciate. Simplicity is its strength. Over the next few weeks the idea for the ultimate Ring Dance, #11, took form.

Initiation, View No1, wood, leather cord, 22” x 16” x 13”, $1800

The piece called “Initiation” began with wonder and a pile of black walnut scraps. I glued them together on a curve, then faired the faces and edges smooth. That gave me an intriguing form I hadn’t imagined at the outset. It reminded me of a piece of body armor, protection for the left half of the chest.

Four new sculptures are hanging around the entry stairs at the Refuge. These pieces continue the “Ring Dance” series. They hold the space vacated by an older piece that just left the grounds for permanent installation in downtown Olympia. While I’ve been focused on other things these last months these intriguing structures have been quietly gestating in the background. I’m still surprised when I see them out there, dancing.  

Ring Dance #2/ CORE, which was at the west end of State St. on Percival Landing in 2012, is now mounted permanently in a street-side parklet near the NE corner of Fourth and Franklin Streets in Olympia. In the daytime its shadow walks across the sidewalk and climbs the building to the east. At night the streetlights print two copies of the piece in shadows on the wall. I’m honored to see the piece out on its own in the world. 

All the Ring Dance pieces are based on the abstract arrangement of circular elements. They are fabricated using a procedure that avoids pre-thinking what the result will look like. I collaborate with the elements and processes, adding them one by one to the piece, and sometimes in repeating clusters. As an overall thrust surfaces I work to enhance that. The process is unnerving at times. I don’t know how it will come out and that can make me anxious. Continuing anyway leads to final pieces I could never have imagined in advance. So I proceed. 

The new pieces, Ring Dance numbers six, seven, eight, and nine, are the result of a series of interwoven creative experiments based on rings made by slicing pipe, and a “staple” form made from a length of heavy channel iron. I wondered what would happen if I introduced the linear, masculine element of the staple, mixing it in with the rings. I also began experimenting with opening the rings so that they could intersect in new ways. 

All four pieces developed at once as I played with the elements and connections that fascinated me. At various times I thought it was all moving toward one piece. At other times it was all moving toward more scrap. Finally one piece after another emerged as discreet siblings. Just like us they are made of the same stuff. Through whimsy, chance, and intention, each becomes a unique character.

Be well,
Don

For Olympia’s 2013 Percival Plinth Sculpture Project I applied with the TINE BALL I put together a year or two ago. The core of the piece is a double spiral made from the half-circle spring-steel tines of a hay rake. I knew that if it was accepted into the exhibition I’d have to come up with a base for the piece, some way to affix it to the plinth and hold it up against the sky. 

The TINE BALL was already galvanized and powder-coated silver. When the proposal was accepted, I fabricated two curving rods from a scrap-pile of short 7/8” steel rounds, and cut out some brackets that would allow me to bolt them to two of the 3” spring coils on the tines. Some scraps of 2” angle iron became a base that would fit the design constraints of the plinth. 

With the piece all together I realized I wanted it to be red—like OXYGEN (Ring Dance #5)—in order to stand out in the complicated downtown, harbor-front space of Percival Landing. It’s summertime—powder-coating took four weeks. I installed it June 10, on schedule. 

To me, part of TINE BALL’s beauty is the delicacy of the form. A breeze can make it shudder. It’s a bit delicate for the “fraternity rules” classically considered for such situations. I knew there was a risk in putting it out where the public can interact with it. The sign says “do not climb”—but eight days after installation someone apparently did just that. My guess is he or she tried to get inside the ball. I know, I’ve thought of that too. Tine points broke loose at each hub. 

Now we were only one week from the opening reception. I had to repair and reinforce the piece, and get it coated again (third time’s the charm!) We took it down and over the weekend. I repaired and beefed-up the hubs and added nine more welds to stabilize the belly of the ball. 

C T Specialties in Olympia was just as busy as the first time I took it in for powder-coat, but they recognized my plight and had it ready in four days. I tipped them enough to buy everyone a couple of beers, and loaded-up the rebuilt TINE BALL still hot from the oven. We bolted it back on the plinth fifteen minutes before the opening reception began. Unbelievable. 

Now, the risk is still there. The piece is stronger but still delicate—you wouldn't see the difference unless I pointed it out. It might be able to withstand another exuberant “return to the womb”—but I hope I don’t find out. Meanwhile, it’s there. Come down and see it. 

If you get there during July or August, the city has ballots available in pamphlet-boxes on the landing. Olympia will buy the sculpture that gets the most votes, for their growing collection. Voting ends August 31. Here’s an essential voting tip: your vote won’t count unless you fill in the box that asks what it is you like about the piece you have chosen. The answer is subjective; you can’t get it wrong—so answer the question and be counted! 

In other news: Debi of 33 Image Design rebuilt my sculpture and furniture website. It’s now searchable and very slick. I also have a verbal commitment with Gallery IMA in Seattle’s Pioneer Square to begin representing my work soon. I’ll let you know. 

Cheers!
Don

Now flowing water sparkles, and sings, strengthened every time it rains. An occluded acre of the place has been opened up. At first it all felt too exposed; there was a sense of vulnerability. Now as the Indian Plum gets into full leaf, and the ferns begin to unfurl, it feels like revelation. Perception carries farther into the depths of the forest; dimension has been somehow doubled. The whole place feels larger—the invisible brought to light.

Olympia's Fall Arts Walk is tomorrow—the evening of Friday October 5—and continues through the afternoon of October 6. Sorry for the late notice. 

I’ll have two pieces completed this summer on display along with pieces by other metal workers from the SPSCC welding program. We are showing again at the Euphorium, in the Security Building, at the corner of Fourth Ave. and Washington Street in downtown Olympia. 

TINE BALL, a piece composed of twenty recycled (and reconfigured) tines from a dump rake, will be there, along with a galvanized steel table I wrote about in a previous posting, called WINDSWEPT STEEL TABLE. The table base is made from some twisty scraps left over when I bent the rings for Ring Dance #3 & 4. 

Thank you to those of you who took the time to vote in Olympia’s Percival Plinth  Sculpture Project. The votes are in, and Olympia sculptor Ross Matteson’s bronze and steel piece “Windstar” gathered the people’s choice award with nearly 30% of the votes cast. Congratulations to Ross! You can see more of his well-wrought wildlife bronzes at Matteson Sculpture.

I have not heard how many votes “Ring Dance #2” received, but I continue to hear great response for the piece. You can enjoy it until next June at Percival Landing, and while driving around the corner of State and Water streets in downtown Olympia. The piece is for sale if you wish to continue enjoying it in your home or business landscape. I have three further Ring Dance pieces available, including the musical dyad subtitled “Duet.” 

We are having a gorgeous extended September here at the southern tip of the Salish Sea. It’s a bit dry, and the light breezes send a crisp sustaining whisper through the curling leaves still on the trees. Every step on the beach trail crunches with the leaves that have already fallen.